3810-6220 Azurewave AW-GE780 Wireless Lan PCIe Mini Card - PCI Express b/g £ 9.73 PCIe Mini Card introduces a scalable, point-to-point, power-managed, serial interface to the laptop computer market. Full isochronous data transfer support is provided to guarantee minimum service latency and bandwidth requirements. This mode is advantageous for isochronous or time-sensitive applications, such as streaming video, where it is more important to display frames in a timely fashion than it is to display every frame. The Mobile PCIe Mini Card interface enables a new level of interconnect performance on mobile platforms upgrading the I/O bandwidth from a half-duplex 133 MB/s to a full-duplex 250 MB/s. The PCIe Mini Card replaces the Mini PCI card, typically used on the mobile motherboard for build-to-order optional functions. The PCIe Mini Card (30 mm x 51 mm) is about half the size of a Mini PCI (61 mm x 51 mm) card (Type 3A), thus two PCIe Mini Cards can fit in the space for one Mini PCI card. PCIe Mini Card is much smaller than the Mini PCI cards and they are not interchangeable so check that your Laptop chassis will accept them before ordering. Chassis which accept the new PCIe Mini cards are usually recent Core / Core Duo / Core 2 Duo chassis as these are normally based on the new PCI Express design. General Specifications: Model Name: AW-GE780 Product Description: Mini PCI Express Wireless Module WLAN Standard: IEEE 802.11b/g, Wi-Fi compliant Host Interface: Mini PCI Express Dimensions: 51mm X 30mm X 3.3mm (with shielding) Weight: 18 g Operating Conditions: Voltage 3.3V +/- 5% Temperature Operating: -10~70 C: Storage: -20 ~ 65oC Electrical Specifications: Frequency Range 2.4 GHz ISM Bands 2.412-2.472 GHz, 2.484 GHz Modulation: 802.11g: OFDM 802.11b: CCK(11, 5.5Mbps), DQPSK(2Mbps), BPSK(1Mbps) Output Power: 802.11b: typical 16 1.5dBm 802.11g: typical 13 1.5dBm Antenna: Build-in inside host (U.FL-R-SMT) Receive Sensitivity: 802.11b: typical -76dBm at 11Mbps 802.11g: typical -68dBm at 54Mbps Data Rates: 802.11b: 1, 2, 5.5, 11Mbps 802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps Power Consumption: 802.11b: TX : MAX 710mA at 3.3V , MIN 630mA at 3.3V Rx : MAX 330mA at 3.3V , MIN 310mA at 3.3V 802.11g: TX : MAX 650mA at 3.3V , MIN 620mA at 3.3V Rx : MAX 340mA at 3.3V , MIN 320mA at 3.3V Operating Range: Open Space: ~300m: Indoor: ~100m (The transmission speed may vary according to the environment) Weight:  .01000      Website:  www.azurewave.com

3810-6250 Azurewave AW-NE770 Wireless Lan PCIe Mini Card - PCI Express a/b/g/n £ 26.08 PCIe Mini Card introduces a scalable, point-to-point, power-managed, serial interface to the laptop computer market. Full isochronous data transfer support is provided to guarantee minimum service latency and bandwidth requirements. This mode is advantageous for isochronous or time-sensitive applications, such as streaming video, where it is more important to display frames in a timely fashion than it is to display every frame. The Mobile PCIe Mini Card interface enables a new level of interconnect performance on mobile platforms upgrading the I/O bandwidth from a half-duplex 133 MB/s to a full-duplex 250 MB/s. The PCIe Mini Card replaces the Mini PCI card, typically used on the mobile motherboard for build-to-order optional functions. The PCIe Mini Card (30 mm x 51 mm) is about half the size of a Mini PCI (61 mm x 51 mm) card (Type 3A), thus two PCIe Mini Cards can fit in the space for one Mini PCI card. PCIe Mini Card is much smaller than the Mini PCI cards and they are not interchangeable so check that your Laptop chassis will accept them before ordering. Chassis which accept the new PCIe Mini cards are usually recent Core / Core Duo / Core 2 Duo chassis as these are normally based on the new PCI Express design. Features: Mini PCI Express High speed wireless connection up to 300Mbps 3 antennas to support 2(Transmit) 3(Receive) MIMO technology Low power consumption and high performance Enhanced wireless security Specifications: Model Name: AW-NE770 Product Description: Mini PCI Express Wireless Module WLAN Standard: IEEE 802.11a/b/g/n, Wi-Fi compliant Host Interface: Mini PCI Express Major Chipset: Atheros AR5418 (MAC/Baseband) + AR5133(Radio) Dimensions: 51mm X 30mm X 3.8mm (4.5mm with shielding) Weight: 25 g Operating Conditions: Voltage 3.3V +/- 5% Temperature Operating: 0 ~55oC: Storage: -20 ~ 65oC Electrical Specifications: Frequency Range 2.4 GHz ISM Bands 2.412-2.472 GHz, 2.484 GHz 5.15-5.25 GHz (FCC UNII-low band) for US/Canada, Japan 5.25-5.35 GHz (FCC UNII-middle band) for US/Canada 5.725-5.825 GHz (FCC UNII-high band) for US/Canada Modulation: 802.11a/g/n: OFDM 802.11b: CCK(11, 5.5Mbps), DQPSK(2Mbps), BPSK(1Mbps) Output Power: 802.11a: typical 13dBm (54Mbps) 802.11b: typical 17dBm (11MBps) 802.11g: typical 14dBm (54Mbps) 802.11n:typical 9dBm (MCS 15) Antenna: Build-in inside host (U.FL-R-SMT) Receive Sensitivity: 802.11a: typical -65dBm at 54Mbps 802.11b: typical -80dBm at 11Mbps 802.11g: typical -70dBm at 54Mbps 802.11n:typical -59dBm at HT40 MCS15 typical -65dBm at HT20 MCS15 Data Rates: 802.11a: 54,48,36,24,18,12,9,6 Mbps 802.11b: 11,5.5,2,1 Mbps 802.11g: 54,48,36,24,18,12,9,6 Mbps 802.11n: up to 300Mbps - Draft Power Consumption: 802.11a: Tx:TBD: Rx:TBD, 802.11b: Tx:TBD: Rx:TBD 802.11g: Tx:TBD: Rx:TBD, 802.11n: Tx:TBD: Rx:TBD Operating Range: Open Space: ~300m: Indoor: ~100m (The transmission speed may vary according to the environment) Security: WEP 64-bit and 128-bit encryption WPA (Wi-Fi Protected Access) Operating System Compatibility: Windows ME/2000/XP Weight:  .01000      Website:  www.azurewave.com

3810-6091 Billionton GUBTCR42 Class 2 V2.0 8207D Laptop Bluetooth adapter 10m range £ 16.92 Now you can connect your laptop to any bluetooth enabled mobile phone with this neat Bluetooth adapter. You can access e-mail & Internet no matter where you are with just a little help from your bluetooth mobile phone. Plus, when you are back in the office, you can hook yourself up to your office network as well as communicate with other Bluetooth - enabled devices. These bluetooth adapters connect to an internal port within the laptop chassis and located beneath the HDD cover. These adapters will not work in a desktop PC and have not been verified for use with laptop chassis other than the Mitac 8207D chassis we hold in stock. Detail Specifications Connection Bluetooth v2.0 EDR Max Speed Data rate: 723 kbps ACL: 64 b/s SCO - Frequency 2400 - 2483.5 MHz - Modulation GFSK 1 Mbps 1600hop/ sec Power Source USB Bus powered equivalent DC power 5V Effective Distance 10 meter working distance Others Operating system: Windows ME, Windows 2000, Windows XP - Security: paring, encryption, authentication Warranty 1 year Limited Warranty Please read the PDF file for a detailed specification. Weight:  .01000      Website:  www.billionton.com.tw

3810-6092 Billionton GUBTCR42 Class 2 V2.0 8224D Laptop Bluetooth adapter 10m range £ 16.92 Now you can connect your laptop to any bluetooth enabled mobile phone with this neat Bluetooth adapter. You can access e-mail & Internet no matter where you are with just a little help from your bluetooth mobile phone. Plus, when you are back in the office, you can hook yourself up to your office network as well as communicate with other Bluetooth - enabled devices. These bluetooth adapters connect to an internal port within the laptop chassis and located beneath the HDD cover. These adapters will not work in a desktop PC and have not been verified for use with laptop chassis other than the Mitac 8224D chassis we hold in stock. Detail Specifications Connection Bluetooth v2.0 EDR Max Speed Data rate: 723 kbps ACL: 64 b/s SCO - Frequency 2400 - 2483.5 MHz - Modulation GFSK 1 Mbps 1600hop/ sec Power Source USB Bus powered equivalent DC power 5V Effective Distance 10 meter working distance Others Operating system: Windows ME, Windows 2000, Windows XP - Security: paring, encryption, authentication Warranty 1 year Limited Warranty Please read the PDF file for a detailed specification. Weight:  .01000      Website:  www.billionton.com.tw

3810-6090 Billionton GUBTCR42 Class 2 V2.0 8258D Laptop Bluetooth adapter 10m range £ 16.92 Now you can connect your laptop to any bluetooth enabled mobile phone with this neat Bluetooth adapter. You can access e-mail & Internet no matter where you are with just a little help from your bluetooth mobile phone. Plus, when you are back in the office, you can hook yourself up to your office network as well as communicate with other Bluetooth - enabled devices. These bluetooth adapters connect to an internal port within the laptop chassis and located beneath the HDD cover. These adapters will not work in a desktop PC and have not been verified for use with laptop chassis other than the Mitac 8258D chassis we hold in stock. Detail Specifications Connection Bluetooth v2.0 EDR Max Speed Data rate: 723 kbps ACL: 64 b/s SCO - Frequency 2400 - 2483.5 MHz - Modulation GFSK 1 Mbps 1600hop/ sec Power Source USB Bus powered equivalent DC power 5V Effective Distance 10 meter working distance Others Operating system: Windows ME, Windows 2000, Windows XP - Security: paring, encryption, authentication Warranty 1 year Limited Warranty Please read the PDF file for a detailed specification. Weight:  .01000      Website:  www.billionton.com.tw

3810-3030 Edimax EN-9220F-64 Gigabit PCI 1000Base-SX SC, Tamarack Chipset, Fiber £ 77.55 This Gigabit network adapter complies with 64 bit PCI specifications and supports half/full duplex features which can double your network speed. This adapter supports 1000Mbps network speed to comply with IEEE 802.3z standard and operates on 1000Base-SX Multi Mode Fiber. The adapter is supplied with drivers including Microsoft Windows 95 OSR2, 98, Me, 2000, NT, XP, Netware Server 5.x, Netware ODI for DOS and Linux. Key Features: Support for both 64 and 32-bit, 66/33MHz PCI bus Full Duplex Support for Tag VLAN Built-in FIFO buffers Plug-and-Play Web-Based Management features Support for Windows 95 OSR2/98/Me/NT/2000/XP, NetWare Server 5.X, Netware ODI for DOS and Linux Specifications: Standards : IEEE 802.3z 1000BASE-SX Gigabit Ethernet Network Media : 62.5/125 multi-mode fiber with SC type connector Protocol : CSMA/CD Transmission Rate : 1000Mbps / 2000Mbps Hardware Required : IBM compatible PC with available PCI slot ( PCI 2.1/2.2 ), 66/33MHz, 32bit & 64bit IRQ Line : Assigned by system I/O Address : Assigned by system Weight:  .20000      Website:  www.edimax.com.tw

3810-3011 Edimax Gigabit PCI EN-9230TX-32. 10/100/1000 BaseT. Plug and Play Installation, £ 9.19 Gigabit Ethernet products are designed to provide solutions to bandwidth problems for medium and large enterprises. Customers need not change the current network architecture, being able to immediately upgrade to gigabit bandwidth level. Gigabit Ethernet solutions make networking more efficient and stable. Key Features: Complies with the IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE 802.3x Supports 32-bit 66/33MHz PCI Local Bus Mater for high-speed operation of Rev.2.2 specification. One RJ-45 connector with Auto-MDI/MDX Network Media: 10 Base-T, UTP/STP category 3, 4 or 5 cable 100 Base-TX, UTP/STP category 5 cable 1000 Base-TX,4 pairs category 5 cable Network Driver Support: Windows 95 OSR2/98/98SE/Me/NT/2000/XP Netware Server 5. x Linux Weight:  .06300      Website:  www.edimax.com.tw

3810-2224 Edimax PCI EN-9130TXA 10/100 Base Fast Ethernet Adapter with Web based £ 3.27 Edimax 10/100Mbps PCI Fast Ethernet adapters are the fundamental building blocks of a high performance and easy to manage Fast Ethernet network. Edimax Fast Ethernet adapters is a Web-Based management system that allows network administrators to monitor and manage all your local and remote PCs in the organization from the home or office computer. You can collect all managed PCs' critical information with a simple click of WebDESKManager, which works together with popular Internet Browsers such as Microsoft IE andNetscape Navigator. Suitable for:- Windows 3.1/95/98/Me/NT/2000/XP Netware 3.x~5.x Linux/Unix Specifications:- Network Speed: 10/100Mbps Bus Architecture: PCI Rev 2.2 Network Standard: IEEE802.3 IEEE802.3u IEEE802.3x Network Port: UTP x 1 Boot ROM/Socket ACPI / WOL - (PCI 2.2 / PCI 2.1) CertificationFCC Class B / CE Mark / C-Tick Weight:  .20000

3810-2222 Edimax PCI EN-9130TXL 10/100 Base Fast Ethernet Adapter with Full Web based £ 3.00 Edimax 10/100Mbps PCI Fast Ethernet adapters are the fundamental building blocks of a high performance and easy to manage Fast Ethernet network. Edimax's PCI Fast Ethernet Adapters are your solution to build a solid network and minimise the total cost of ownership. The Webdesk Management system that allows network administrators to monitor and manage all your local and remote PCs in the organisation from the home or office computer. Manageable, compatible, plug-n-play and 32-bit bus-mastering architecture, Edimax Fast Ethernet adapters provide a true value to your network. Suitable for:- Windows 3.2/95/98/Me/NT/2000/XP Netware 3.x/4.x/5.x Linux Unix Specifications:- Network Speed: 10/100Mbps Bus Architecture: PCI Rev 2.2 PCI 32bit 33MHz Network Standard: IEEE802.3 IEEE802.3u IEEE802.3x Network Port: UTP x 1 Weight:  .20000

3850-1010 Edimax PN-2200 Home PNA Network Phone Line Adapter £ 7.05 Build a home network using the existing telephone wiring, no new cabling, hub or terminator required. 1Mbps data transfer rate which is adequate for File/Printer/Modem Sharing, Internet access, MultiPlayer Games and more in a home environment. Support up to 25 PCs with 500 feet maximum between PCs in a network. Simultaneous Home Networking and normal telephone/fax/modem operation. 10Mbps Ethernet port on card to enable the user to upgrade to Ethernet at anytime. Supported under Windows 95/98/NT. Weight:  .20000      Website:  www.edimax.com

3810-6120 Intel 3945ABG Wireless Lan PCIe Mini Card - PCI Express £ 22.49 PCIe Mini Card introduces a scalable, point-to-point, power-managed, serial interface to the laptop computer market. Full isochronous data transfer support is provided to guarantee minimum service latency and bandwidth requirements. This mode is advantageous for isochronous or time-sensitive applications, such as streaming video, where it is more important to display frames in a timely fashion than it is to display every frame. The Mobile PCIe Mini Card interface enables a new level of interconnect performance on mobile platforms upgrading the I/O bandwidth from a half-duplex 133 MB/s to a full-duplex 250 MB/s. The PCIe Mini Card replaces the Mini PCI card, typically used on the mobile motherboard for build-to-order optional functions. The PCIe Mini Card (30 mm x 51 mm) is about half the size of a Mini PCI (61 mm x 51 mm) card (Type 3A), thus two PCIe Mini Cards can fit in the space for one Mini PCI card. PCIe Mini Card is much smaller than the Mini PCI cards and they are not interchangeable so check that your Laptop chassis will accept them before ordering. Chassis which accept the new PCIe Mini cards are usually recent Core / Core Duo / Core 2 Duo chassis as these are normally based on the new PCI Express design. Weight:  .01000      Website:  www.askey.com.tw

3810-6130 Intel 4965AGN Wireless AG Lan PCIe Mini Card - PCI Express - 4965AGN MM2GN £ 27.49 PCIe Mini Card introduces a scalable, point-to-point, power-managed, serial interface to the laptop computer market. Full isochronous data transfer support is provided to guarantee minimum service latency and bandwidth requirements. This mode is advantageous for isochronous or time-sensitive applications, such as streaming video, where it is more important to display frames in a timely fashion than it is to display every frame. The Mobile PCIe Mini Card interface enables a new level of interconnect performance on mobile platforms upgrading the I/O bandwidth from a half-duplex 133 MB/s to a full-duplex 250 MB/s. The PCIe Mini Card replaces the Mini PCI card, typically used on the mobile motherboard for build-to-order optional functions. The PCIe Mini Card (30 mm x 51 mm) is about half the size of a Mini PCI (61 mm x 51 mm) card (Type 3A), thus two PCIe Mini Cards can fit in the space for one Mini PCI card. PCIe Mini Card is much smaller than the Mini PCI cards and they are not interchangeable so check that your Laptop chassis will accept them before ordering. Chassis which accept the new PCIe Mini cards are usually recent Core / Core Duo / Core 2 Duo chassis as these are normally based on the new PCI Express design. Weight:  .01000      Website:  www.intel.com

3830-2221 PCMCIA Card Bus (32bit) Edimax EP-4103 Network Interface Card 10/100BaseTX STP £ 7.05 Designed for Type II or Type III CardBus/PCMCIA Notebooks, this adaptor takes full advantage of the power of high performance, 32 bit architecture mobile PCs. Full/half duplex operation is autodetected. Ease of installation, compatibility with all major network software, energy saving green card make this adaptor the superior choice. Weight:  .25000      Website:  www.edimax.com

3830-2222 Edimax EP-4103DL PCMCIA Dongle Free Network I/F Card 10/100 (32 Bit) 10/100 £ 9.60 Designed for Type II or Type III CardBus/PCMCIA Notebooks, this adaptor takes full advantage of the power of high performance, 32 bit architecture mobile PCs. Full/half duplex operation is autodetected. Ease of installation, compatibility with all major network software, energy saving green card make this adaptor the superior choice. Its dongless design makes connection simple and avoids the risk of lost cables! Weight:  .04300      Website:  www.edimax.com

3830-2230 Edimax EP-4203DL PCMCIA GIGABIT Dongle Free Network Card 10/100/1000 (32-bit) £ 16.57 Designed for 32bit CardBus/PCMCIA Notebooks, this Gigabit adaptor takes full advantage of the power of high performance, 32 bit architecture mobile PCs. Ease of installation & compatibility with all major network software make this adaptor the superior choice. Its dongless design makes connection simple and avoids the risk of lost cables! Specification: Standards: IEEE802.3, 802.3u, 802.3ab, 802.3x Bus Architecture: 32-bit Cardbus Network Port: UTP x 1 (Auto MDI/MDI-X) Network Drivers: Windows 98/98SE/Me/NT/2000/XP/Server2003/Netware QDI for DOS LED's: 10/100/1000Mbps Speed, Link/Activity Dimensions: 14x55x110mm (HxWxD) Operating Temperature: 0~55 Degrees Operating Humidity: 10~95% (Non-Condensing) Certification: FCC Class B, CE Mark, C-Tick, VCCI Weight:  .04300      Website:  www.edimax.com

2412-0820 USB 2.0 to Fast Ethernet Convertor £ 14.03 This neat module can quickly and easily add network functionality to your PC. No need to open the case of your PC, simply plug this neat device into a free USB socket and you will have a 10/100Mbit network port. The simplest solution for adding broadband internet or networking your PC. Specifications: * USB specification revision 2.0 compliant * Supports TCP/IP, NetBEUI, IPX/SPX protocols * Supports USB suspend/resume detection logic, wake-up frame , Link starts change * Supports up to 32KB external, 2KB internal SRAM * Supports WIN98/ME/2000/XP or higher Weight:  .15000      Website:  www.viewcon.net

3850-1020 Bluetooth Adapter 1.1 Compliant Class 1 (40 metres) £ 8.67 This user friendly Bluetooth Adapter allows the user the ability to create a Bluetooth Personal Area Network with other compatible Bluetooth devices. Key Features Provides encrypted link security Share, Edit, Print documents via Bluetooth Access internet via Bluetooth Mobile phone with GPRS, CDMA or Bluetooth enabled PC with internal connection Browse internet, check emails, send faxes, play games Exchange or synchronize Personal Information Manager of data Wireless connection via a serial cable, mouse or keyboard Work with microphone and speakers on PC Work with a Bluetooth Headset via audio in-out on a PC or mobile phone Specifications USB UHC1/OHC1 spec 1.1 Compliant Compliant with Bluetooth 1.1 specification Frequency Range: 2.4-2.48 GHz 79 Channel FHSS Power Class: Class 2/1 Data Transfer Rate: 1.0Mbps (Max) Rx Sensitivity: 0.1% BER/PIN : -80dBm Input Voltage/Current: DC 3.3V /100mA LED Indicator: power on Antenna: Integrated Antenna Low Power Consumption: Standby mode iG25a Transmission mode iG80mA Dimension: 59 x 8 x 20mm Weight: 10g Weight:  .20000

2412-0710 IrDA Wireless Bridge , USB £ 9.56 Compact and stylish IrDA Wireless bridge allowing you to easily enable IrDA function on your PC through the USB port. This IrDA Wireless Bridge offers fast IrDA of up to 4mbps. Main Features * Fully Compatible with IrDA 1.1 and USB 1.1 * USB Plug and Play * Compatible with FIR 4Mbps, MIR, SIR and ASK 56Kbps * No power adapter required * Supports Win98/2000/XP or higher Weight:  .04500      Website:  www.viewcon.net

3860-2010 Edimax ET-912MSC 100Base TX (UTP Cat 5) to 100BaseFX (Fiber Optic ST) converter £ 41.45 The fast ethernet market is growing rapidly due to the higher bandwidth demand. In addition to the network interface cards, hubs and switches, 100Mbps Fast Ethernet Media Converters provide the last critical component to the whole Fast Ethernet network implementation. Edimax's ET-912STM is a 100Mbps Fast Ethernet Media Converter offering a simple and cost-effective method to convert between Fast Ethernet 100Base-TX UTP cables and 100Base-FX fiber optic cables. As defined in IEEE 802.3u Fast Ethernet standards, 100BaseTX specifies the transmission over category UTP media that can transmit signals up to 100 meters. 100Base-FX specifies the transmission in fiber media that can transmit signals from 140 meters to 2 kilometers depending on whether half or full duplex operating mode is selected. The ET-912STM comes with one UTP connection (with two RJ45 connectors) that allow you to connect to a 100Base-TX device such as a workstation, hub or switch and one fiber connection (ST type connectors) that allow you to connect a 100Base-FX device. The ET-912STM will convert the signals between the two different transmission media. The ET-912STM is truly a plug-and-play device, no settings or jumpers or switches are required. The Full-Duplex and Half-Duplex modes will automatically adjust according to the operation mode of connected devices. Equipped with transparent port management and power-on self-diagnostic routine, a set of diagnostic LEDs indicate the converter's operating status. Weight:  .20000      Website:  www.edimax.com

4050-2200 Edimax AC-M1000 Network Access Controller. £ 470.87 Introduction AC-M3000/M1000 is a Network Access Controller specially designed for wired and wireless data network environments in small to medium size businesses. It integrates network management and secures data transmission to ensure a mobile and efficient working environment. System administrators can effectively monitor wired or wireless users, either employees or guests via AC-M3000/M1000s user management interface. Moreover, administrators can discover, configure, monitor, and upgrade all manageable access points (EW-7206APg) from a single, centralized AP management interface. AC-M3000/M1000 allows administrators to regulate wired and wireless network systems efficiently and protect the network. Key Features VPN secured network technology Single login account roaming among various APs Centralized AP management Role-based and policy-based access control Multiple authentication methods Fail-over on dual WAN ports Per-user bandwidth management Record of per-user network traffic history On-demand, instant guest account management Benefits Simplified LAN Deployment and Management Platform Easily integrates with the existing network infrastructure. Friendly interface for centralized management platform: no need for IT outsourcing. High efficiency, high flexibility, and low equipment cost. Best solution to manage both wireless and wired network. Powerful Network Security Capabilities Advanced IPSec VPN encryption to enhance the security of wired and wireless data transmission. Data packets filtering through built-in firewall Diverse user authentication management platforms, including NT, LDAP, RADIUS, POP3, and Local Database. Comprehensive Network User Management Platform Support various authentication platforms. Manage various types of users via policy-based control approach. Provide detailed per-user network traffic history log for analysis and record keeping. Manage user accounts in policy-oriented manner, including bandwidth, account valid time, route, authentication, and firewall settings. Per-user bandwidth limit enables flexible traffic control to prevent P2P download. Manage on-demand user accounts according to different conditions with billing, including valid time, bandwidth usage, number of packet transferred Centralized Access Point (EW-7206APg) Management Centralized control and automatic AP discovery. Manage and monitor of APs via the management interface, including APs system settings, online status, enabling, disabling, reset, and firmware upgrade Periodically monitor APs and force problematic APs to reset Networking: Support Router, NAT mode Support Static IP, DHCP, PPPoE on WAN interface. Choose freely which LAN is authentication-enabled LAN. Contain built-in DHCP server and support DHCP relay. Support NAT: (a) IP/Port Destination Redirection (b) DMZ Server Mapping (c) Virtual Server Mapping (d) H.323 Pass-Through Support static route Support SMTP redirection Support Walled Garden (free surfing zone) Support MAC Address Pass-Through Support HTTP Proxy Contain built-in hardware-based VPN accelerator. Security Features Support data encryption: WEP(64/128-bit), WPA, WPA2, IPSec VPN. Support various authentication methods: WPA-PSK, WPA2- PSK, IEEE 802.1x(EAP-MD5, EAP-TLS, CHAP, PEAP). Provides VPN termination of IPSec tunnels to enhance wireless security. Support VPN pass-through (IPSec and PPTP). Support DoS attack protection Support MAC Access Control List Support user Black List Allow MAC address and user identity binding for local user authentication AP Management Support IEEE 802.11b/g AP (EW-7206APg). Provide centralized management via HTTP/SNMP interface. Discover APs automatically. Add and delete APs directly from the device list. Enable or disable APs easily via management interface. Provide MAC Access Control List for each AP. Maintain configuration profiles of APs via local terminal. Upgrade and restore APs firmware via one single management Weight:  3.45000      Website:  www.edimax.com.tw

4030-1010 Edimax ES-3105P 5 Port N-Way Switch, 10/100BaseTX, Desktop, Plastic Case, £ 7.83 The Edimax 5 port Fast Ethernet switch is perfect for improving the performance of small network. This switch satisfies the need for high-quality products at an affordable price - enabling even the most budge-conscious organizations to trade up to the next level of networking power. This switch supports 10/100Mbps auto-negotiation on all ports, for seamless migration to 100Mbps connections without time-consuming trips to the wiring closet whenever end stations are upgraded to Fast Ethernet. All ports also automatically sense half or full duplex connections for high speed server or switch-to-switch configurations. This switch is most suited to the following applications : 1. It can be placed near the core of the network to eliminate bottlenecks and improve the overall network throughput. 2. It can extend the span of a network that has the maximum allowed hubs connected in series. 3. When used as a desktop connectivity device, it provides the highest possible performance for connecting users to your network. These Fast Ethernet switches' compact and slim design allows direct placing on the desktop or conveniently mounted on the wall or the side of a desk to accommodate cabling consideration. Key features: 1) Supports Auto MDI/MDI-X eliminating the need for crossover cables. 2) The non-blocking architecture delivers full wire speed and flow control for maximum performance. 3) 10/100 Mbps auto-negotiation and Full/Half duplex settings. 4) Store and forward architecture eliminates error packets in the network, improving efficiency. Specification: Network Ports: 5 Standards: 802.3 10BaseT, 802.3u 100BaseTX Speed: 10Mbps or 100Mbps Full Duplex: Yes Auto-Negotiation: Yes Connector: RJ-45 MAC Address: 1024 Buffer Memory: 128KB Dimensions: 127 x 83 x 30 mm Weight: 180g Warranty: 2-years Weight:  .85000      Website:  www.edimax.com

4040-1010 Edimax ES-3108P 8 Port N-Way Switch 10/100BaseTX, Desktop, Plastic Case, £ 10.58 The Edimax 8-port Fast Ethernet switch is perfect for improving the performance of small network. This switch satisfies the need for high-quality products at an affordable price - enabling even the most budge-conscious organizations to trade up to the next level of networking power. This switch supports 10/100Mbps auto-negotiation on all ports, for seamless migration to 100Mbps connections without time-consuming trips to the wiring closet whenever end stations are upgraded to Fast Ethernet. All ports also automatically sense half or full duplex connections for high speed server or switch-to-switch configurations. This switch is most suited to the following applications : 1. It can be placed near the core of the network to eliminate bottlenecks and improve the overall network throughput. 2. It can extend the span of a network that has the maximum allowed hubs connected in series. 3. When used as a desktop connectivity device, it provides the highest possible performance for connecting users to your network. These Fast Ethernet switches' compact and slim design allows direct placing on the desktop or conveniently mounted on the wall or the side of a desk to accommodate cabling consideration. Key features: 1) Supports Auto MDI/MDI-X eliminating the need for crossover cables. 2) The non-blocking architecture delivers full wire speed and flow control for maximum performance. 3) 10/100 Mbps auto-negotiation and Full/Half duplex settings. 4) Store and forward architecture eliminates error packets in the network, improving efficiency. Specification: Network Ports: 8 Standards: 802.3 10BaseT, 802.3u 100BaseTX Speed: 10Mbps or 100Mbps Full Duplex: Yes Auto-Negotiation: Yes Connector: RJ-45 MAC Address: 8192 Buffer Memory: 256KB Dimensions: 187 x 100 x 30 mm Weight: 370g Warranty: 2-years Weight:  .90000      Website:  www.edimax.com

4050-2223 Edimax ES-3116P 16 Port N-Way Switch, 10/100BaseTX, Plastic Case, £ 24.53 The Edimax 16-port Fast Ethernet switch is perfect for improving the performance of small network. This switch satisfies the need for high-quality products at an affordable price - enabling even the most budge-conscious organizations to trade up to the next level of networking power. This switch supports 10/100Mbps auto-negotiation on all ports, for seamless migration to 100Mbps connections without time-consuming trips to the wiring closet whenever end stations are upgraded to Fast Ethernet. All ports also automatically sense half or full duplex connections for high speed server or switch-to-switch configurations. This switch is most suited to the following applications : 1. It can be placed near the core of the network to eliminate bottlenecks and improve the overall network throughput. 2. It can extend the span of a network that has the maximum allowed hubs connected in series. 3. When used as a desktop connectivity device, it provides the highest possible performance for connecting users to your network. These Fast Ethernet switches' compact and slim design allows direct placing on the desktop or conveniently mounted on the wall or the side of a desk to accommodate cabling consideration. Key features: 1) Supports Auto MDI/MDI-X eliminating the need for crossover cables. 2) The non-blocking architecture delivers full wire speed and flow control for maximum performance. 3) 10/100 Mbps auto-negotiation and Full/Half duplex settings. 4) Store and forward architecture eliminates error packets in the network, improving efficiency. Specification: Network Ports: 16 Standards: 802.3 10BaseT, 802.3u 100BaseTX Speed: 10Mbps or 100Mbps Full Duplex: Yes Auto-Negotiation: Yes Connector: RJ-45 MAC Address: 8192 Buffer Memory: 256KB Dimensions: 290 x 100 x 30 mm Weight: 480g Warranty: 2-years Weight:  1.12800      Website:  www.edimax.com.tw

4050-2222 Edimax ES-3116RE+ 16 Port N-Way Switch, 10/100BaseTX, VLAN & Trunking, 19 Rk, £ 76.49 Edimax rackmount solutions are aimed at the SME market who have more demanding applications. These hubs are constructed in a sturdier metal casing and are ideal for locating in a comms room 19 rack cabinet but may be desktop mounted if this is preferred. These switches are targeted at workgroup, departmental or backbone computing environments at medium to large business. Edimax's ES-31xx Fast Ethernet Switches bring you the most powerful high speed network solutions. You can deploy Fast Ethernet switching wherever needed, from the backbone down to individual desktops These switches support 10/100Mbps auto-negotiation on all ports, for seamless migration to 100Mbps and reduced management overhead. All ports also automatically sense half or full duplex connections for high speed server or switch-to-switch configurations. Suitable for: 10Mbps Networks: Yes but only Cat5 RJ45 cabling not BNC 100Mbps Networks: Yes 1000Mbps Networks: No Key features: Ports: 16 RJ45 (UTP or STP) Standards: 802.3 10BaseT, 802.3u 100BaseTX and 802.3x 100BaseTX Switch type: Store and forward Full wire speed: Yes Uplink Ports: 1 Fibre Support: Optional Speeds: 10Mbps or 100Mbps auto-negotiation / Full and Half duplex Filter/Forward Rate: 148,800 packets/sec. Management / Smart: No VLAN: Yes - Port - Based VLAN up to 16 Groups Trunking: Yes - 2 Groups Auto Negotiation: All Ports Full Duplex / Half Duplex: All Ports MAC Address: 8K Buffer Memory: 512KB Weight: 2.6Kg Dimensions: 440 x 201 x 45 mm Weight:  3.35000      Website:  www.edimax.com

4050-2220 Edimax ES-3116RL 16 Port N-Way Switch, 10/100BaseTX, 19 Rackmount, £ 36.31 Edimax's 16 port Fast Ethernet Switch brings you the most powerful high speed network solution. You can deploy Fast Ethernet switching wherever needed, from the backbone down to individual desktops. This switch satisfies the need for high-quality products at an affordable price - enabling organizations to trade up to the next level of networking power. This switch supports 10/100Mbps auto-negotiation on all ports, for seamless migration to 100Mbps connections without time-consuming trips to the wiring closet whenever end stations are upgraded to Fast Ethernet. All ports also automatically sense half or full duplex connections for high speed server or switch-to-switch configurations. The aggregate bandwidth of this switch can reach up to 2Gbps. The switch is most suited to the following applications: 1. It can be placed near the core of the network to eliminate bottlenecks and improve the overall network throughput. 2. It can extend the span of a network that has the maximum allowed hubs connected in series. 3. When used as a desktop connectivity device, it provides the highest possible performance for connecting users to your network. The size of this 16 port switch is 19 rackmount. It is targeted at workgroup, departmental or backbone computing environments at medium to large business. Key Features: Complies with the IEEE802.3 Ethernet, IEEE802.3u Fast Ethernet Provides Store-and-Forward architecture and full wire speed forwarding and filtering rates All of UTP ports support Auto-MDI/MDI-X function All of UTP Ports support full/half duplex modes and auto-negotiation Supports flow control: back pressure for half-duplex mode, IEEE 802.3x for full-duplex mode Extensive front-panel diagnostic LEDs Internal universal switching power supply Compact 19 1u Rackmount size Specifications: Standards:IEEE802.3 IEEE802.3u IEEE802.3x 10/100Mbps: ES-3116RL - 16 x 100/10M (RJ-45)Auto-MDI/MDI-X MAC address: 8K Buffer Memory: 512KBytes Weight:  3.45000      Website:  www.edimax.com.tw

4050-2408 Edimax ES-3124RL 24 Port N-Way Switch, 10/100BaseTX, 19 Rackmount, £ 45.12 Edimax's 24 port Fast Ethernet Switch brings you the most powerful high speed network solution. You can deploy Fast Ethernet switching wherever needed, from the backbone down to individual desktops. This switch satisfies the need for high-quality products at an affordable price - enabling organizations to trade up to the next level of networking power. This switch supports 10/100Mbps auto-negotiation on all ports, for seamless migration to 100Mbps connections without time-consuming trips to the wiring closet whenever end stations are upgraded to Fast Ethernet. All ports also automatically sense half or full duplex connections for high speed server or switch-to-switch configurations. The aggregate bandwidth of this switch can reach up to 2Gbps. The switch is most suited to the following applications: 1. It can be placed near the core of the network to eliminate bottlenecks and improve the overall network throughput. 2. It can extend the span of a network that has the maximum allowed hubs connected in series. 3. When used as a desktop connectivity device, it provides the highest possible performance for connecting users to your network. The size of this 24 port switch is 19 rackmount. It is targeted at workgroup, departmental or backbone computing environments at medium to large business. Key Features: Complies with the IEEE802.3 Ethernet, IEEE802.3u Fast Ethernet Provides Store-and-Forward architecture and full wire speed forwarding and filtering rates All of UTP ports support Auto-MDI/MDI-X function All of UTP Ports support full/half duplex modes and auto-negotiation Supports flow control: back pressure for half-duplex mode, IEEE 802.3x for full-duplex mode Extensive front-panel diagnostic LEDs Internal universal switching power supply Compact 19 1u Rackmount size Specifications: Standards:IEEE802.3 IEEE802.3u IEEE802.3x 10/100Mbps: 24 x 100/10M (RJ-45) Auto-MDI/MDI-X MAC address: 4K Buffer Memory: 768KBytes Weight:  3.45000      Website:  www.edimax.com.tw

4050-3025 Edimax ES-516G+ Smart GIGABIT Switch. 16port Gigabit, 2port 10/100/1000 TP/1000 £ 190.35 The Switch is a cost-effective web smart switch that meets all IEEE 802.3/u/ab/z Gigabit, Fast Ethernet specifications. It is equipped with 16 10/100/1000Base-T ports and 2 of which are dual media ports that accommodate optional 10/100/1000Base-T or SFP modules. The switch can be managed through Ethernet port using Web browser, the network administrator can logon the switch to monitor, configure and control each ports activity. In addition, the switch implements the QoS (Quality of Service), Port Mirror, VLAN, Port Trunk. It is suitable for office application. Features: 16x10/100/1000Mbps Auto Negotiation Gigabit ethernet TP ports 2x 10/100/1000Mbps TP or 1000Mbps SFP Fiber dual media auto sense Supports 400KB fram buffer Supports 8K MAC address entries Full duplex flow control (IEEE802.3x) and half duplex back pressure Extensive front panel diagnostic LEDs: System: Power, Link/Act, 10/100/1000Mbps Standard 19 Rack mount size Suports 2 fans Supports jumbo frame Supports port setting function, port enable/disable, speed, duplex mode and flow control selectable Weight:  4.00000      Website:  www.edimax.com

4050-3021 Edimax ES-5224RS+ GIGABIT Switch. 2port Gigabit, 24port 10/100 BaseTX, £ 150.16 Edimax's new Gigabit Over Copper series of adapters and switches represent the next logical step in networking connectivity. Gigabit Ethernet Over Copper technology provides a significant jump in speed, without the need for pulling expensive fibre optics cabling. As with all Edimax networking equipment, this new line of products will combine high-performance, quality and affordability. The ES-524RS+ Gigabit switch offers 24 ports of 10/100mbps, 2 ports of 10/100/1000 mbps and 2 SFP Module Ports. Weight:  4.55000      Website:  www.edimax.com

4050-3006 Edimax ES-5500P 5 port GIGABIT Switch £ 31.72 The Edimax ES5500P 5-Port Gigabit Ethernet Switch is a compact size and ideal for SOHO/Home networking. The switch's non-blocking architecture provides your network with full-wire speed connections, ensuring no bottlenecks are caused as a result of the switch. The switch's flow control ensures reliable packet transfer and prevents packet loss, thus increasing reliability and performance. Specification: - Standards : IEEE802.3, IEEE802.3u, IEEE802.3ab - Gigabit Port : RJ45 x 5 - MAC Address : 4k - Buffer Memory : 437.5KB - Dimension 30(H) x 187(W) x 100(D)mm - Weight 450g - Temperature 10~55cXC - Humidity 0~90% (Non-Condensing) - Certification : FCC Class B, CE Mark, C Tick Weight:  1.30000      Website:  www.edimax.com

4050-3007 Edimax ES-5800P 8 Port Gigabit Switch, Metal Case £ 38.07 ES-5800P 8 Ports Gigabit Desktop Switch -------------------------------------------------------------------------------- All Ports supports Auto-MDI/MDI-X Supports Full-Wire Speed and Flow Control Auto-negotiation & Full/Half duplex Compact size design Features Complies with the IEEE802.3 Ethernet, IEEE802.3u Fast Ethernet and IEEE802.3ab Provides Store-and-Forward architecture and full wire speed filtering and forwarding rates Automatic source address learning and aging All UTP Ports support Auto-MDI/MDI-X, no cross-over cable needed All UTP Ports support full/half duplex modes and auto-negotiation Supports flow control: back pressure for half-duplex mode, IEEE 802.3x for full-duplex mode Supports Bandwidth Control and Broadcast Storm ControlExtensive front-panel diagnostic LEDs External power adapter Supports Auto-MDI/MDI-X Each of the switch's ports is able to auto sense whether your cable is the normal or cross over type, so you don't need to worry about having the wrong cables. Supports Full-Wire Speed and Flow Control The switch's non-blocking architecture provides your network with fullwire speed connections, also the switch's flow control (back pressure/IEEE802.3x) ensures reliable packet transfer and prevents packet lost, thus increasing reliability and performance. Non-Blocking architecture The switch performs at full duplex on all ports. This feature provides full wire speed to the connected devices and greatly increases the network performance. Compact size designed The switch's compact designed allow you to save precious space in your crowded office 5 / 8 port Gigabit Desktop Switch 1000/100/10Mbps Features: Complies with the IEEE802.3 Ethernet, IEEE802.3u Fast Ethernet and IEEE802.3ab Provides Store-and-Forward architecture and full wire speed filtering and forwarding rates Automatic source address learning and aging All UTP Ports support Auto-MDI/MDI-X, no cross-over cable needed All UTP Ports support full/half duplex modes and auto-negotiation Supports flow control: back pressure for half-duplex mode, IEEE 802.3x for full-duplex mode Supports Bandwidth Control and Broadcast Storm Control Extensive front-panel diagnostic LEDs External power adapter Compact size designed Specification: Product 5 / 8 Port Gigabit Switch Standards IEEE802.3 IEEE802.3u IEEE803.ab 10/100/1000M Port 1000/100/10 M (RJ-45) Auto-MDI/MDI-X MAC Chip Broadcom BCM5388 MAC address 4k Buffer Memory 437.5KBytes Power External power adapter Dimension 30(H) 187(W) 100(D) mm Temperature 10-550C Humidity 0-90% (Non-Condensing) Weight:  .90000      Website:  www.edimax.com

4010-1310 Edimax PS-1100A+ Print Server. 1 Parallel Port, 10/100Mbps, STP, Multi Protocol £ 49.35 Weight:  1.05000

4010-2334